Matrice 200 Series Maintenance Plan

As low as $0.00

Out of stock

Vendor Part Number
B-NB-M200MAINT


GOLD STAR MATRICE 200 SERIES MAINTENANCE PLAN

DJI recommends regular scheduled maintenance for all drones with more than 50 hours of flight time. Aerial Media Pros’ highly trained technicians are now available to perform professional maintenance services for the Matrice 200 Series V2.

By purchasing the Gold Star Maintenance plan, your Matrice 200, 210, or 210 RTK will be professionally inspected, calibrated, and cleaned. With the Gold Star Maintenance Plan your craft will receive new propellers, propeller mounting plates, landing gear, landing gear mounting brackets, weatherproofing top shell plug, and weatherproofing battery contact cover.

Our technicians will perform a variety of key maintenance procedures including FPV camera calibration, compass and IMU calibration, frame inspection, motor inspection and cleaning, and much more. After all of this has been performed, a full picture and flight test will be performed to ensure that your craft is functioning properly.

Protect your investment with the Gold Star Maintenance Plan.

*Turn Around Time Subject To Change.




SILVER STAR MATRICE 200 SERIES MAINTENANCE PLAN

The Aerial Media Pros Silver Star Plan includes all the inspections and calibrations of the Gold Star Maintenance Plan but does not include the replacement of propellers, propeller mounting plates, landing gear, landing gear mounting brackets, weatherproofing top shell plug, or weatherproofing battery contact cover.

Should it be determined that your craft requires the replacement of parts, a technician will contact you. With your authorization, the necessary items will be replaced for a flat labor rate of $75, plus the cost of parts.

*Turn Around Time Subject To Change.







GOLD STAR MATRICE 200 SERIES MAINTENANCE PLAN

DJI recommends regular scheduled maintenance for all drones with more than 50 hours of flight time. Aerial Media Pros’ highly trained technicians are now available to perform professional maintenance services for the Matrice 200 Series V2.

By purchasing the Gold Star Maintenance plan, your Matrice 200, 210, or 210 RTK will be professionally inspected, calibrated, and cleaned. With the Gold Star Maintenance Plan your craft will receive new propellers, propeller mounting plates, landing gear, landing gear mounting brackets, weatherproofing top shell plug, and weatherproofing battery contact cover.

Our technicians will perform a variety of key maintenance procedures including FPV camera calibration, compass and IMU calibration, frame inspection, motor inspection and cleaning, and much more. After all of this has been performed, a full picture and flight test will be performed to ensure that your craft is functioning properly.

Protect your investment with the Gold Star Maintenance Plan.

*Turn Around Time Subject To Change.




SILVER STAR MATRICE 200 SERIES MAINTENANCE PLAN

The Aerial Media Pros Silver Star Plan includes all the inspections and calibrations of the Gold Star Maintenance Plan but does not include the replacement of propellers, propeller mounting plates, landing gear, landing gear mounting brackets, weatherproofing top shell plug, or weatherproofing battery contact cover.

Should it be determined that your craft requires the replacement of parts, a technician will contact you. With your authorization, the necessary items will be replaced for a flat labor rate of $75, plus the cost of parts.

*Turn Around Time Subject To Change.





Gold Star Matrice 200 Series Maintenance Plan

  • FPV Camera Calibration
  • Compass Calibration
  • Vision Sensor Calibration
  • Stress Crack Inspection
  • Central Frame Inspection and Maintenance
  • Aircraft Firmware Update
  • Aircraft Full Cleaning
  • Central Component IMU Inspection and Calibration
  • Motor Inspection and Cleaning
  • Electronic Speed Controller Inspection
  • Remote Control Firmware Update
  • Humidity and Water Seal Inspection
  • RTK and Ground Station Inspection and Test(As Required)
  • Battery Update & Test
  • Full Flight Test
  • Camera Video and Picture Test
  • 2x (Pairs) DJI Matrice 200 - 1760S Quick-Release Propellers (Part No.4)
  • 4x DJI Matrice 200 - Propeller Mounting Plate (Part No.5)
  • 2x DJI Matrice 200 Series - Landing Gear Mounting Bracket (Part No.15)
  • 2x DJI Matrice 200 V2 Series - Landing Gear
  • 1x DJI Matrice 210 - Weatherproofing Top Shell Plug (Part No.17)
  • 2x DJI Matrice 200 - Weatherproofing Battery Contact Cover (Part No.19)



Silver Star Matrice 200 Series Maintenance Plan

  • FPV Camera Calibration
  • Compass Calibration
  • Vision Sensor Calibration
  • Stress Crack Inspection
  • Central Frame Inspection and Maintenance
  • Aircraft Firmware Update
  • Aircraft Full Cleaning
  • Central Component IMU Inspection and Calibration
  • Motor Inspection and Cleaning
  • Electronic Speed Controller Inspection
  • Remote Control Firmware Update
  • Humidity and Water Seal Inspection
  • RTK and Ground Station Inspection and Test(As Required)
  • Battery Update & Test
  • Full Flight Test
  • Camera Video and Picture Test

Write Your Own Review
You're reviewing:Matrice 200 Series Maintenance Plan
Your Rating