DJI Matrice 300 OSDK Expansion Module (Part No.13)

Vendor Part Number
  • Compatible with the M300 RTK and Manifold 2
  • Converts interfaces on the M300 RTK OSDK to standard interfaces such as USB Type-A, UART serial port and XT30 power output, to allow for connection with onboard computing platforms
  • Can be used with the single upward gimbal to meet the needs of more scenarios
  • When mounted onto the M300 RTK, the module can be put into the safety transport case while attached to the drone, ensuring easier storage

Allows connection of M300 RTK with Manifold 2, and offers adapter interfaces for onboard computing platforms.

This module converts the M300 RTK OSDK interfaces to standard interfaces such as USB Type-A, UART serial ports and XT30 power plugs, to allow connection with onboard computing platforms. The module is not designed with dust-proof or water-proof capabilities.

Please assemble according to the instructions in he User Manual before use.

  • Compatible with Matrice 300 RTK & Manifold 2

  • 2x Bracket A (upper)
  • 1x Bracket B (left)
  • 1x Bracket C (right)
  • 3x Bracket D (reinforcing rib)
  • 4x Bracket connection block
  • 1x OSDK adapter plate module
  • 1x USB cable (with two type-A ports)
  • 1x XT30 power cable
  • 3x Wire clip
  • 3x Foot pad
  • 5x Hand screw
  • 15x Screw A (M1.6)
  • 5x Screw B (M2.0)
  • 5x Screw C (M3.0)
  • 3x Screw D (M1.6 step)
  • 1x Screwdriver kit

Write Your Own Review
You're reviewing:DJI Matrice 300 OSDK Expansion Module (Part No.13)
Your Rating