DJI Ronin 2 3-Axis Handheld / Aerial Stabilizer

$8,399.00
In stock
SKU
S-DJI-RONIN-2-STABILIZER
Vendor Part Number
CP.ZM.00000008.01
  • Most versatile professional 3-axis stabilization system
  • Monocoque carbon fiber frame design
  • High torque motors supporting cameras up to 30 lbs
  • Fine tune balancing for precision control
  • Self-heating hot-swappable batteries
  • On-board power for camera and accessories
  • Integrated camera controls
  • Built-in GPS & compatible with DJI A3 Flight Controller













General

Built-In Functions 

Operation Modes
-Underslung Mode
-Upright Mode
-Briefcase Mode
-Handheld, Car Mount, Aerial & Tripod Mode

Axis Modes

-3-axis

-Pan-Lock

-Roll-360 (enabled through firmware update)
Built-in, independent IMU module
DJI Advanced 32-Bit ARM Processor
DJI Specialized Gimbal Drive Motors with Encoders
Dual Battery System
Bluetooth Module
D-Bus Receiver Supported
2.4 GHz/5.8 GHz Receiver
Temperature Sensors
Built-in Touch Panel
Built-in GPS
USB Type-C Connection
Power and Video Signal through Slip Ring



Mechanical & Electrical Characteristics

Working CurrentStatic current: 300 mA (@22.8 V)
Dynamic current: 500 mA (@22.8 V)
Locked motor current: Max 15 A (@22.8 V)
Run Time8 hours
2.5 hours (when powering gimbal, camera and accessories at the same time)
Operating Temperature-4°F ~ 122°F (-20°C ~ 50°C)
WeightIncluding handle bar: 14 lb (6.4 kg)
Excluding handle bar: 11 lb (5.0 kg)
Gimbal DimensionsExcluding handle bar: 350 mm (W) x 416 mm (D) x 530 mm (H)
Including handle bar: 630 mm (W) x 416 mm (D) x 720 mm (H)


Peripheral


Camera Tray DimensionsMaximum depth from the center of gravity on camera base plate: 245 mm
Maximum height measured from top of the camera base plate: 165 mm
Maximum width: 180 mm
Accessory Power Connections14.4 V x 4 Camera Cage (Combined 8 A), 14.4 V x 2 Pan Motor (Combined 4 A), 14 V x2 P-Tap (8 A)
GCU Input PowerIntelligent Battery: 4280 mAh-22.8 V
Connections2.4 GHz/5.8 GHz Remote Control, Bluetooth 4.0, USB Type-C
PC Assistant Software RequirementsWindows 7 or above; Mac OS X 10.11 or above
Mobile Assistant Software RequirementsiOS 9 or above; Android 4.4 or above


Working Performance

Load Weight (Reference Value)30 lbs (13.6 kg)
Angular Vibration Range± 0.02°
Maximum Controlled Rotation SpeedPan axis: 360°/s
Tilt axis: 360°/s
Roll axis: 360°/s
Mechanical Endpoint RangePan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±220°
Controlled Rotation RangePan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±30°
Load Weight (Reference Value)30 lbs (13.6 kg)
Angular Vibration Range± 0.02°
Maximum Controlled Rotation SpeedPan axis: 360°/s
Tilt axis: 360°/s
Roll axis: 360°/s
Mechanical Endpoint RangePan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±220°
Controlled Rotation RangePan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±30°

  • 1x Ronin 2 Gimbal
  • 1x Grip
  • 1x Dual TB50 Battery Mount
  • 1x Camera Top Cross Bar
  • 1x Camera Base Plate
  • 1x USB Type-C Data Cable
  • 1x Hex Tool
  • 5x Camera Screw 3/8"-16
  • 5x Camera Screw 1/4"-20
  • 8x Screws M4-10
  • 4x Screws 1/4

Write Your Own Review
You're reviewing:DJI Ronin 2 3-Axis Handheld / Aerial Stabilizer