MicaSense RedEdge-P

As low as $9,995.00

In stock

  • Pan-sharpened resolution of 2cm/pixel at 60m, 4cm/pixel at 120m
  • CFexpress storage for capture rate of 2-3 images per second 
  • Five spectral bands at 1.6 MP each
  • Removable Skyport V2
  • Increased spatial resolution without sacrificing for a narrow field of view
Customize MicaSense RedEdge-P
Micasense RedEdge-P with DJI Skyport  

* Required Fields

Your Customization
MicaSense RedEdge-P
MicaSense RedEdge-P

In stock



    The ideal choice for high-resolution RGB and multispectral data. The rugged, high quality, powerful RedEdge multispectral sensor has been upgraded with a high-resolution panchromatic band delivering smooth output resolutions up to 2 cm (at 60 metres).  That’s twice as sharp as the industry standard RedEdge-MX! Multispectral and RGB imagery is captured with a single camera that has an optimized FOV and frame rate to ensure efficient flight. By integrating a high-resolution color imager with synchronized multispectral imagers, this solution provides pixel-aligned outputs at previously unattainable resolutions and maintains the efficiency and reliability of the RedEdge legacy. RedEdge-P raw data is easy to process with industry-standard software.

    • Weight: 300g (10.6 oz.) RedEdge-P + DLS 2
    • Dimensions: 8.2 x 6.2 x 5.4 cm (3.2in x 2.4in x 2.1in)
    • External power: 7.0 V-25.2 V
    • Spectral bands: Blue, green, red, red edge, near-IR(global shutter, narrowband)
    • Wavelength (nm): Blue (475 nm center, 32 nm bandwidth), green (560 nm center, 27nm bandwidth), red (668 nm center, 14 nm bandwidth), red edge (717 nm center, 12nm bandwidth), near-IR (842 nm center, 57 nm bandwidth)
    • RGB output: 5.1 MP (global shutter, aligned with all bands)*
    • Ground sample distance:
      • o7.7cm per pixel (per MS band) at 120m AGL
      • o3.98cm per pixel (panchromatic band) at 120m AGL
    • Capture rate: 2-3 captures per second raw DNG
    • Interfaces: 4 GPIO: Trigger input, top of frame out, 1 PPS out, host button. USB 2.0 port for WiFi, serial, 10/100/1000 ethernet, and CF Express Storage.
    • Field of view:o49.6° HFOV x 38.3° VFOV (MS)o44.5° HFOV x 37.7° VFOV (PAN)
    • Triggering options: Timer mode, overlap mode, external trigger mode (PWM, GPIO,serial and Ethernet options), manual capture mode
    • Heat: 0-40C ambient (no airflow); 0-50C ambient with airflow >0.5m/s

    * with appropriate post-processing

    Note: Specifications are subject to change without notice

    • DLS 2 with embedded GPS
    • Calibrated Reflectance Panel (CRP 2)
    • USB WiFi dongle
    • Lens cover
    • Necessary integration cables
    • Assorted mounting hardware
    • CFexpress card
    • CFexpress card reader
    • Hard Carrying Case
    • Quick Start Guide

    Write Your Own Review
    You're reviewing:MicaSense RedEdge-P
    Your Rating